Welcome to BBN High Strength Steels Factory

What kind of steel is 1.8928 material?

The cold rolling precision bright pipe system produced by our factory has smooth appearance, uniform wall thickness, no oxide layer and high precision. The inner hole of 1.8928 material steel pipe can be divided into round, spline and plum blossom, which is widely used in automobile, motorcycle, electric power, petrochemical, ship, aerospace, bearing, pneumatic components, oil cylinder, boiler equipment, medical equipment, fitness equipment and other industries. Materials can be divided into: 10#, 20#, 35#, 45#, 40Cr, 16Mn, etc. According to the needs of users, we can make all kinds of national standard non-standard precision pipes. Special 1.8928 material materials and specifications can be ordered in advance.

Carbon steel 1.8928 material is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the 1.8928 material content of sulfur and phosphorus, the better the quality of carbon steel.

S235JR steel plate is one mainly of Carbon and low alloy steel, S235JR steel plate is a type of steel sheet under EN standard which is used to build ship, bridge, belongs to high strength sheet. EN10025-2 S235JR is equivalent to DIN:ST37-2,JIS:SS400,ASTM:A283C, GB Q235B and UNI:FE360B.

After a certain period of time, the steel products will reduce the toughness and increase the hardness, which is called aging effect. Generally, this effect is strongest at 200-300 ℃. The aging tendency of 1.8928 material, low carbon steel (about 0.1% carbon content) is especially large, while high carbon steel and alloy steel containing molybdenum, barium or tungsten are not easy to produce aging. For boiler steel plate, it is required that the reduction rate of impact initial property is not more than 50%, or the absolute value of impact initial property is not less than 3-3.5KGM / cm2.

1.8928 material, Q690 steel is low alloy high strength steel. It belongs to the Chinese GB standard steel. Q690 steel is named after its yield strength value. Q is the abbreviation of yield strength, that is, the yield strength of Q690 steel is 690 MPa. Chemical composition of Q690 steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 1.00, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015. The mechanical properties of Q690 steel are: yield strength ≥ 690 MPa, tensile strength 730-940 MPa, elongation after fracture ≥ 14%, impact energy 31J.

Since its establishment, the company has participated in several key railway and highway projects. After years of development, the company’s 1.8928 material domestic market has been exported to more than a dozen provinces and cities including Kunming, Shenzhen, Hunan, Sichuan, Shanghai, Nanjing, Heihe, Jilin, Inner Mongolia, and Xinjiang . International trade is exported to Kazakhstan, South Korea, Vietnam, South Africa and many other countries, and has been well received by customers.

After-sales service is an important part of measuring a product good or not. After sales service can't be ignored. Good service can really make consumers feel relieved. We have always done a good job in after-sales service, so as to bring consumers a better reference when purchasing and a better experience during use of our steel materials. We will call back and follow up the performance of our steel products regularly.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels