Where to find 1.8914 EN 10025-6 high strength steel suppliers

Q345 is a grade of carbon structural steel. Q is the meaning of yield strength, which 1.8914 EN 10025-6 high strength steel is taken from the initial of Chinese Pinyin of "Qu"; 345 is the value of yield point, in MPa. Q345 refers to carbon structural steel with yield point (σ s) of 345mpa. The following letters indicate the quality level, including A, B, C, D and E. Q345 steel has good comprehensive mechanical properties, low temperature performance, good plasticity and weldability. Q345 steel is usually in hot rolling or normalizing state.

Oxygen is a harmful element in 1.8914 EN 10025-6 high strength steel steel. With the increase of oxygen content, the strength of 1.8914 EN 10025-6 high strength steel steel increased, but the plasticity, especially the toughness, decreased significantly, and the weldability became worse. The presence of oxygen causes hot brittleness of 1.8914 EN 10025-6 high strength steel steel.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the 1.8914 EN 10025-6 high strength steel rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of 1.8914 EN 10025-6 high strength steel steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.