Welcome to BBN High Strength Steels Factory
Established in 2014, Steel Safety Day was set up to reinforce awareness of the five most common causes of safety incidents and to create a safer working environment across the entire steel industry worldwide. By focusing every year on the five causes - moving machinery, working at heights, falling objects, on-site traffic and S690QL yield process safety incidents - worldsteel intends to set up a continuous improvement process and reiterate its commitment to the safety and health of the people who work in the S690QL yield industry.
Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole work procedure run smoothly. For every step, we have special person to be in charge and responsible for our customer and update information to the customer in time. So you just need not worry too much to purchase steel materials from our company.
The corrosion resistance of stainless steel depends on the alloy elements contained in the steel. The chemical composition of S690QL yield, stainless steel and acid resistant steel is different. The former is not necessarily resistant to chemical medium corrosion, while the latter is generally stainless. The better stainless steel also contains nickel. Adding molybdenum can further improve the atmospheric corrosion resistance of stainless steel, especially the corrosion resistance of chloride containing atmosphere.
As per JIS G3101 standard, the Carbon (C), Silicon (Si) and Manganese (Mn) content of SS400 steel plate are not controlled. Phosphorus (P) content of S690QL yield, JIS SS400 steel plate is 0.050% Max and Sulphur (S) content is 0.050% Max. The SS400 steel melting point is 1430 Degree Celsius, Brinell Hardness is 160HB, density is 7.85g/cm3, Young’s Modulus is 190-210Gpa. The strength and elongation of JIS SS400 steel plate varies with thickness. Generally, the tensile strength of SS400 steel plate is 400-510 Mpa. Elongation is above 21%. Yield strength ≥245Mpa for thickness≤16mm. When the JIS SS400 steel plate is thciker than 100mm, the yield strength shall not less than 205Mpa.
Square hollow section S355J2H to Turkey. In January of 2015, our customer from Turkey chose us as their supplier of seamless RHS EN10219 S355J2H with a trail order of 120 tons. They required DNV test for the MTC and each tube. DNV inspector tested all the tubes and MTC. When our customer received the reports, they gave us a second order of 852.5 tons. Since then we maintain a long time cooperation relationship.
Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our S690QL yield products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.
Leave a Message