Welcome to BBN High Strength Steels Factory
We are world class steel EN 10025-6 S620QL1 high strength steel materials supplier. We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for EN 10025-6 S620QL1 high strength steel quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build long-term cooperation with you.
EN 10025-6 S620QL1 high strength steel, Q345 angle steel has two kinds: unequal angle steel (two sides are not the same size) and equal angle steel (two sides are the same size). EN 10025-6 S620QL1 high strength steel, Q345 angle steel is widely used for mechanical processing, building structure, steel structure, etc.. In addition, Q345 angle steel can withstand - 40℃ low temperature at least and can be used in cold areas. The weight calculation formula of Q345 angle steel: 0.00785 * (side width + side width - side thickness) * side thickness, the value obtained is the weight per meter, and then multiplied by the length to calculate the weight of a piece.
The boiler steel pipe has excellent anti-oxidation and corrosion performance: the general steel pipe is easy to be corroded under high temperature and produces harmful substances, but the boiler steel pipe has no such worries. The high-precision material and wall thickness of the boiler steel pipe can effectively prevent the corrosion. Good tensile strength of EN 10025-6 S620QL1 high strength steel, boiler steel pipe: it can keep the original state well without affecting its quality after being heated and stretched.
The hot rolling method is to heat the EN 10025-6 S620QL1 high strength steel steel material to about 1000 ℃ ~ 1250 ℃ and use the rolling mill to roll it. The traditional hot rolling process is generally divided into the following two steps: the first step is to use the primary rolling mill or billet rolling mill to roll the ingot, billet or continuous casting billet into a certain shape and size of billet. This kind of EN 10025-6 S620QL1 high strength steel rolling process is usually called semi-finished product production, also called blank production.
Q355B steel and EN 10025-6 S620QL1 high strength steel steelBoth Q345B and Q355B are low alloy steels. The difference is that the yield strength of Q345B low alloy steel and Q345B low alloy steel is different. In Q345B low-alloy steel, q represents the yield strength of this material, and the latter 345 represents the yield value of this material is around 345mpa. Q in Q355B low-alloy steel also represents the yield strength of this material, and the latter 355 indicates that the yield value of this material is around 355mpa.
Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.
Leave a Message