S690QL hardness demand forecast in the coming year

According to the data released by the Japan iron and Steel Union (JISF), the export volume of Japanese steel in the second quarter of 2020 S690QL hardness is about 4.959 million tons, a year-on-year decrease of 14.2%; the export volume in the first half of 2020 is about 11.07 million tons, with a year-on-year growth of 1.8%. It has been revealed that the year-on-year increase in export volume does not mean that Japan's export S690QL hardness situation of Pugang is better in the first half of the year, but only because the base number of the same period last year is too low.

Our after sales department is an very important part of our department structures. After the customer receive steel materials, our after sales department will follow up regularly and solve problems for them in time if they have the needs. We romise to return the goods for free for its lifetime if it is quality of the steel material itself. Meanwhile, if you have any advice or complaints, also welcome to feed back to our after sales department, and we are trying to give better service to you.

The yield strength of A36, D36, E36 and F36 is not less than 355N/mm^2, and the S690QL hardness tensile strength is 490~620N/mm^2. A, D, E and F respectively indicate that they can be at 0° and -20 ° respectively. Impact toughness that can be achieved at -40℃, -60 ℃.

40Cr grade under GB/T 3077-2015 standard is a alloy steel bar material. S690QL hardness, 40Cr alloy chemical composition (C: 0.37 ~ 0.44, Si: 0.17 ~ 0.37, Mn: 0.50 ~ 0.80, Cr: 0.80 ~ 1.10, Ni: ≤0.30, P: ≤0.030, S: ≤0.030, Cu: ≤0.30, Mo: ≤0.10). Heat treatment: First quenching heating temperature (℃): 850; coolant: oil; Temperature heating temperature (℃): 520. 40Cr steel tensile strength (σb / MPa): ≥980. Yield point (σs / MPa): ≥785

Myanmar 4800 tons ABS AH36 and ABS A shipbuilding plates. This is very good customer of us, and we have cooperated many times for shipbuilding plates S690QL hardness . The most frequently ordered is shipbuilding plates, almost hundreds tons every 2 month, which are finally supplied to Myanmar’s navy. Just in last year, we have supplier more than 4800 tons shipbuilding plates for the customer continuously.

We are known as S690QL hardness leading manufacturers, suppliers and exporters in the market all over the world. We engage in providing a wide range of plates which are accurately mass produced by using the best quality of parts which gives maximum durability and dependability. The most important thing to know as a potential customer of IRON&STEEL is that we S690QL hardness stock, processing service, and distribute all of the popular grades of carbon steel plate, alloy steel, shipbuilding steel and boiler steel. Welcome to come China and visit our factory.